Voobly se me desconecta a los minuto de comenzar

 _Colega_


Posted 8 December 2018 - 4:04 pm
Esiamdos, como idniqué en el título tebgo problemas de conexion con voobly, he intentado con el puerto 16000, darle acceso con el firewall de windos y tambien con mi antivirus avast, pero sigue desconectandome, ayuda por favor, no tengo un conocimiento profundo de informática y no se si he hecho bien los pasos que se requieren para poder jugar con una conexione estable, dejo el pantallazo de mi diagnostico de red de voobly.
Ojala me puedan ayudar.

Gracias
Attachments:
diagnostico de red.png (file size: 22.5 KB)

Link | Reply | Quote
 kitt


Posted 8 December 2018 - 11:43 pm
Hola
Supongo que no ha reenviado ningún puerto? Puede encontrar su enrutador aquí y ayudarlo a configurarlo: [You must login to view link]
¿Cuál es el número de modelo / enrutador / módem?
Puede utilizar la aplicación gratuita aquí para ver cuándo está abierto el puerto:
[You must login to view link]
Quote:
hi
i assume you have not forwarded any ports? you can find your router here and help to set it up: [You must login to view link]
what is the router/modem make /model number?
you can use the free app here to see when the port is open:
[You must login to view link]
Link | Reply | Quote
 _Colega_


Posted 9 December 2018 - 12:22 am
Gracias por darte el tiempo para responder, esto es lo que he hecho hasta ahora, no se si está correcto. En la imagen está tambien el modelo y aparentemente el puerto 16000 abierto.

Gracias
Attachments:
huawei.png (file size: 40.07 KB)

Link | Reply | Quote
 kitt


Posted 9 December 2018 - 1:33 am
Hola
necesita la página de reenvío de puertos no el puerto
[You must login to view link]
Eliminar las entradas que ha realizado y hacer nuevas. aplicar / guardar. asegúrate de que upnp esté apagado
Quote:
hi
you need port forward page not port trigger:
[You must login to view link]
remove entries you have made and make new ones. apply/save. make sure upnp is off
Link | Reply | Quote
 _Colega_


Edited 12 December 2018 - 2:25 am by kitt
Hola. te agradezco tu ayuda, ya desactive el UPnP, gracias.
Pero aun no entiendo si debo llenar, en el router, la pagina donde dice "disparo de puerto" o "mapeo de puerto" (como muestro en las imagenes) y en el caso de cada uno, no se exactamente los datos que debo ingresar.

Ojalá me puedas ayudar.

Gracias
Quote:
Hi. I thank you for your help, and deactivate the UPnP, thanks.
But I still do not understand if I should fill in the router, the page where it says "port shot" or "port mapping" (as shown in the images) and in the case of each, I do not know exactly the data that I must enter .

I wish you can help me.
Attachments:
mapeo puertos.png (file size: 36.2 KB)
disparo de puertos.png (file size: 44.23 KB)

Link | Reply | Quote
 kitt


Edited 12 December 2018 - 2:38 am by kitt
Hola
eliminar todas las entradas en el puerto de activación. aplicar / guardar. luego solo siga el tutorial i linkeado pero use solo el puerto 16000udp en el reenvío de puerto.
en español: [You must login to view link]
[You must login to view link]
use dhcp para configurar la ip después de usar step1 para encontrar su ip privada de la PC: spanish https://www.voobly.com/pages/view/1006

Quote:
hi
remove all entries in port triggering. apply/save. then just follow the tutorial i linked but use only port 16000udp in the forwarding of port.
[You must login to view link]
Link | Reply | Quote
 _Colega_


Edited 13 December 2018 - 12:15 pm by kitt
hola
Me quedan dos dudas, en la casilla "Internal Host", debo ingresar mi Ip o el Ipv4? y debo usar nhcp incluso teniendo una ip fija?

gracias
Quote:
Hello
I have two questions left, in the "Internal Host" box, should I enter my Ip or Ipv4? and should I use nhcp even if I have a fixed ip?
Link | Reply | Quote
 kitt


Posted 13 December 2018 - 12:22 pm
Hola
el host interno es la ip de tu pc, 192.168. El uso de dhcp en su enrutador simplemente le garantiza que obtendrá la misma ip interna cada vez y ahorrará reparaciones, pero si ha arreglado su ip interna en la tarjeta LAN, no tendrá que usar el enrutador dhcp, ya que la obtendrá cada vez.
no olvide aplicar / guardar cada vez que termine de modificar una página de enrutador.
Después de probar el comprobador de puertos.
Quote:
hi
the internal host is the ip of your pc, 192.168. etc. using dhcp on your router just ensures you get the same internal ip each time and saves fixing it but if you have fixed your internal ip on the lan card there no need to use your router dhcp as you will get it each time.
dont forget to apply/save every time you have finished altering a router page.
after try the port checker.
Link | Reply | Quote
 _Colega_


Edited 14 December 2018 - 1:16 pm by kitt
Hola,
he seguido las instrucciones. Pero sigue desconectándome de Voobly. Dejo las capturas de las configuraciones que he hecho, por favor verificar si son correctas.
Gracias
Quote:
Hello,
I followed the instructions. But keep disconnecting me from Voobly. I leave the captures of the configurations that I have made, please verify if they are correct.
Thank you
Attachments:
all.png (file size: 9.56 KB)
ipv4.png (file size: 14.88 KB)
verificar.png (file size: 42.92 KB)

Link | Reply | Quote
 kitt


Edited 14 December 2018 - 1:18 pm by kitt
Hola
todavía está utilizando la asignación de puertos en lugar de puerto hacia adelante. ¿por qué?
Los tutoriales te muestran cómo hacerlo. en la configuración de la tarjeta LAN, debe ingresar los dns ip de su ISP. debe estar disponible en su sitio web o verse en una página de enrutador. puede utilizar el comprobador de puertos gratuito para si el puerto está abierto: [You must login to view link]
Quote:
hi
you are still using port mapping instead of port forward. why?
the tutorials show you how to do it. on the set up of the lan card you need to enter the dns ip's of your isp. should be available from their web site or seen on a router page.



Link | Reply | Quote
[1]
Displaying 1 - 10 out of 10 posts
Forum Jump:
1 User(s) are reading this topic (in the past 30 minutes)
0 members, 1 guests