Some FP after changing modem's FW

 ComTirAl


Posted 26 April 2020 - 10:24 pm
Hi everyone and sorry for my bad english.
Yesterday I've change mi modem's (TECHNICOLOR TG582N) Fw for some wifi unstability. Now I have fp message with a lot of users (not all).
1) I'm connected with LAN
2) I've opened 16000 UDP Port
3) I've tried to open 16000 UDP and TCP, 27000 port, activated UPnp but nothing change.
4) Modem's Firewall is disabled, and Windows's Firewall is configured for voobly.
5) Same problem with wifi connection
6) I can't go back with the old Firmware

This is the message of diagnosis
Received data from 'server 2' through port 16000 (this is your WAN or router port)
Received data from 'server 2' through port 58691 (this is your WAN or router port)
Received data from 'server 1' through port 58387 (this is your WAN or router port)
Received data from 'server 1' through port 16000 (this is your WAN or router port)
Received data from 'server 3' through port 65409 (this is your WAN or router port)
Received data from 'server 3' through port 16000 (this is your WAN or router port)
14 seconds left.
9 seconds left.
4 seconds left.

Test Result: All Pass
Network Health: All tests passed
Recommended Action: None
Details: All tests passed.

Plese Help!!
Link | Reply | Quote
 Kicking


Edited 27 April 2020 - 7:34 pm by Kicking
Hello, you only need to open port UDP 16000. Remove everything you have and do it again please.


Disable Upnp and DMZ.
Link | Reply | Quote
 ComTirAl


Posted 27 April 2020 - 8:04 pm
Already done.
Link | Reply | Quote
 Troy


Posted 29 April 2020 - 7:51 am
Hello can you please take a screenshot of your port page. Upload here: [You must login to view link] Copy+paste link and we will get back to you as soon as possible. Possibly you have missed something and we can help if we see what you have (visually).

Cheers ;flowers
Link | Reply | Quote
 ComTirAl


Posted 29 April 2020 - 2:18 pm
[You must login to view link]

This is the best configuration. Upnp is also activated
Link | Reply | Quote
 Troy


Posted 30 April 2020 - 6:03 am
Hello again, can you please remove the TCP one. Only one you need is the UDP.

Cheers ;flowers
Link | Reply | Quote
 ComTirAl


Posted 30 April 2020 - 11:12 am
Thanks for helping, but I said in my first post that i have already open only UDP port but nothing change
Link | Reply | Quote
 Kicking


Edited 30 April 2020 - 2:08 pm by +sunny@voobly
Are you sure you are in the Port Forwarding Section? Port Triggering is not Port Forwarding.

EDIT:
=====

Could you kindly provide a screenshot of your port forwarding page?
Additionally please confirm that UPNP is disabled. Port forwarding does not work when UPNP is active.
Link | Reply | Quote
 ComTirAl


Posted 30 April 2020 - 2:25 pm
Now i have disabled upnp and opened only udp port

[You must login to view link]
[You must login to view link]

Trigger port is not activate (there is a nulled value "-")

There is always the same problem. Maybe now is worse


Link | Reply | Quote
[1]
Displaying 1 - 9 out of 9 posts
Forum Jump:
1 User(s) are reading this topic (in the past 30 minutes)
0 members, 1 guests

Dân số hiện tại:
Word Association (82 Người chơi)
CBA PathBlood 1.8.0 (52 Người chơi)
1.6 reward campaing (48 Người chơi)
AoKTS updates (37 Người chơi)
Photos of Voobly Players (33 Người chơi)
Chủ đề tích cực nhất tuần qua: