port forward

 [_WKT_]bondstreet


Posted 5 December 2015 - 10:48 pm
can someone help me how to forward ports? i have huawei hg531v1 router
Link | Reply | Quote
 Cavin


Posted 5 December 2015 - 11:02 pm
Hi,

Follow this example (How-to-do) article: [You must login to view link]
Using that article add for this Port: 16000 (all Internal & External fields), Protocol type: UDP, Internal Host: Enter your computer LAN::IPV4 Address and Mapping Name: Voobly.

that's it! you all have to on your Router -> Port Forwarding/Mapping.
Link | Reply | Quote
 [_WKT_]bondstreet


Edited 6 December 2015 - 12:26 am by [_WKT_]bondstreet
hi.i watch this guide before..but i didnt understand i need to make my adress static or can be dynamic like is now?
Attachments:
Untitled.png (file size: 179.65 KB)

Link | Reply | Quote
 Cavin


Posted 6 December 2015 - 1:23 am
You don't need Static IP preference for your current LAN Address; as you're connecting via Ethernet Cable only for your Computer. so ignore that, but in case if you'd connect with W/LAN (WiFi) then only you have to assign up for Preferred Static IP (#KB1034).

From your existing Port Forwarding rule, you did wrong setup - Protocol should be UDP only not TCP/UDP so just change that and you're done perfect!
Attachments:
HG531 Port Forwarding.png (file size: 249.94 KB)

Link | Reply | Quote
 [_WKT_]bondstreet


Edited 6 December 2015 - 2:56 am by [_WKT_]bondstreet
so ok i change that only udp but still have problems and its same.. yes i connect with 1 pc only with cabl not wifi so not need static? but what is problem now i make pictures .. first pictures is just how was before..and i need to write something in voobly nat options..i make that pictures
Attachments:
port.jpg (file size: 197.22 KB)
port2.jpg (file size: 209.47 KB)
port3.jpg (file size: 194.73 KB)
port5.png (file size: 199.53 KB)
port6.png (file size: 338.42 KB)

Link | Reply | Quote
 Cavin


Posted 6 December 2015 - 3:17 am
As I said above you don't required Static IP preference for your LAN address. so, just forgot about it.
Open your Status ► WAN > Network page. and, check your Profile name that matches with your Port Mapping > Interface: INTERNET_R_8_35 - both should be same and exact!

• Send me a snap of your Advanced > Firewall page.



Link | Reply | Quote
 [_WKT_]bondstreet


Edited 6 December 2015 - 4:35 pm by [_WKT_]bondstreet
i dont understand good but i hope i make good pictures. .i try to disable firewall but its same..
Attachments:
Untitled3.png (file size: 277.59 KB)
Untitled1.png (file size: 127.89 KB)
Untitled5.png (file size: 99.62 KB)

Link | Reply | Quote
 Cavin


Posted 6 December 2015 - 7:12 pm
Ok, On your Port Forwarding Rule select your Interface: TR069_R_8_38.

I asked your Router Firewall screenshot mate not your Windows. ^

Still after changing your Interface profile, your problem exists then do use different NAT-T Port on your Router and Voobly settings (i.e 27000 UDP).

*Also if you can, Please visit our live technical chat room support: http://www.voobly.com/games/lobby/77
Attachments:
sfbfbx fgf.png (file size: 521.87 KB)
xdgbcvb.png (file size: 60.03 KB)

Link | Reply | Quote
 [_WKT_]bondstreet


Posted 6 December 2015 - 7:13 pm
ok i will try..is there any chance to u help me with team wiever? :D
Link | Reply | Quote
 Cavin


Posted 6 December 2015 - 7:16 pm
Sorry, not possible but you're welcomed to join our live chat support.
Link | Reply | Quote
 [_WKT_]bondstreet


Posted 8 December 2015 - 6:58 pm
problem is solved ! ty cavin u are king =)
Link | Reply | Quote
 Cavin


Posted 8 December 2015 - 7:46 pm
Glad, Have fun!
You must login into Voobly to view image


Thread Closed.



Link | Reply | Quote
[1]
Displaying 1 - 12 out of 12 posts
Forum Jump:
1 User(s) are reading this topic (in the past 30 minutes)
0 members, 1 guests

What's popular right now: